Luxe Dry Care

The Science Behind Eco-Friendly & Hygienic Dry Cleaning

  • Sep 10, 2026
  • 6 min read read
  • Eco Tech Team
Eco Tech Team Sep 10, 2026 6 min read
The Science Behind Eco-Friendly & Hygienic Dry Cleaning

"Eco-friendly" is used loosely enough in the laundry industry to mean almost anything. Here is what actually matters, in the order that it matters.

Heat and time are the real sterilants

The single most effective way to kill bacteria, dust-mite allergens and viral contamination on fabric is not a chemical. It is holding the textile at a sufficiently high temperature for a sufficient length of time. A domestic wash cycle sits around 40°C; commercial and healthcare laundering runs at 60–71°C for extended dwell times. That gap is the whole reason institutional laundry is epidemiologically different from doing your own laundry at home.

  • Below 50°C: many common allergens and bacteria survive comfortably.
  • 60°C with a long dwell: substantially reduces dust-mite populations and vegetative bacteria.
  • 70°C and above, with the right chemistry: the standard for healthcare linen.

Solvent choice, in plain terms

Perchloroethylene — historically known as PCE — is effective but it is a persistent, volatile solvent with well-documented occupational and environmental downsides. The modern alternative is a fluorocarbon or a hydrocarbon process that works at a lower temperature, recovers the solvent for reuse, and does not require the same ventilation and handling regime.

A genuinely better solvent is one that is closed-loop, recovered at a high rate, and has no odour in the finished garment.

Water, detergent and the microplastic problem

Water consumption is usually the largest environmental cost of a commercial laundry operation, not energy. Modern machines use water-per-kilogram as a published specification, and the meaningful improvements come from load sizing — running a 60 kg machine at 40 kg wastes roughly a third of the water per kilogram.

Detergent choice is where most facilities quietly get it wrong. HEPA-grade filters on the extraction system, correctly dosed low-temperature detergents, and a ban on fabric softener in healthcare linen all reduce the chemical load discharged to the drain.

Measuring it rather than claiming it

If a provider cannot tell you their litres of water per kilogram, or their solvent recovery rate, they are not measuring. Ask for the numbers, and ask what they were a year ago. Improvement that is not tracked is not improvement.

Keep Reading